E3 - Engineer RQ07364

Role: E3 Electrical Engineer – P&C / SCADA Systems Design Team
Location: Burnaby, BC - Edmonds Office, Burnaby or Travel to substations as required
Duration: November 2, 2026 - November 2, 2027
Max T4 Rate: $62.67/
Max INC Rate: $75.80/

General Description

• The E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.

Experience and Role Accountabilities

• A minimum four (4) years of in a relevant engineering field or equivalent.
• Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs, analyzing and resolving problems, and interpreting engineering specifications on low to medium complexity assignments for projects and/or operations.
• Assist project or operations management to meet safety, cost, quality, and time objectives by performing activities such as proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.
• Participate in BC Hydro’s engineering practice by conducting independent studies and analysis, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making typical decisions related to standard methods and designs so that BC Hydro’s engineering standards are maintained.
• Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.
• Engage with BC Hydro’s senior engineering team where engineering problems are difficult, complex, or unusual to support BC Hydro’s management of engineering risk.

Important Notes

• Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.
• BC Registrants provided to BC Hydro through this assignment shall work under BC Hydro’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.

Education and Skills

•University graduate in applied science or engineering
•Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC
•BC Hydro uses a Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius
•Familiarity with CAD systems and drawing standards
•Ability to use standard industry design/analysis software
• Intermediate MS Office skills (Word, Excel, and PowerPoint)
• Intermediate English skills for professional environment, written and spoken

Must Haves

• P.eng & valid P2P
• Class 5 driver’s license
• Basic First Aid certification

Nice to Haves

• Automation and SCADA experience
• Any NERC related experience
• Previous utility experience

Additional Experience and Role Accountabilities

• This role requires experience with the design, configuration, testing and troubleshooting of SCADA systems in electrical utility substations with operating voltages from 12kV to 500kV. Demonstrated experience working with utility SCADA systems design, including the design, configuration, testing, and maintenance of GE RTU products (i.e. GE D400, D20, D200, D25, IBOX), Ethernet networks, DNP3 protocol, Modbus Plus® protocol, and protocol test equipment and software and other similar systems used in electrical utility substations.

• The work is focused on SCADA systems used in transmission stations with operating voltages from 12kV to 500kV.

• Prepare project documentation and deliverables in accordance with BC Hydro project and Engineering Design Practices (i.e. evaluation reports, specifications, proposals, estimates, design basis’, calculations, hazard logs, test plans).

• Prepare design work packages including scope, duration, and level of effort estimates.

• Prepare signed/sealed engineering deliverables as a Professional of Record (PoR) in accordance with EGBC and BC Hydro Design Practices.

• Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC.

• Prepare detailed SCADA design packages, device point assignments, and configurations.

• Configuring/program RTUs, gateway devices, user interfaces, network switches/routers, and other IEDs related to the SCADA systems.

• Specify and procure materials, panel assemblies and other related equipment.

• Test and validate device configurations in a lab environment.

• Prepare and execute pre-commissioning test plans for SCADA systems.

• Provide technical guidance and support throughout the design process (cross-discipline integration, factory testing, installation, commissioning).

• Provide training for end-users and peers on the theory and operational use of the installed or modified equipment/systems.

Duties

The P&C Engineering SCADA Design Team provides engineering expertise and support to high voltage transmission substations, generating stations and distribution facilities. Our team also provides project management, design, maintenance and emergency response services to the company and selected external clients. The successful candidate will be part of the SCADA design team delivering complex, multi-discipline capital projects for BC Hydro.

• Duties will primarily be focused on delivering capital work involving integration of remote monitoring and control equipment of the power system. Providing design, development and testing of equipment used in substations, generating stations and the distribution system

• Undertakes a variety of engineering assignments and is responsible for a project or part of a project. providing instructions, advice, and technical leadership, including reviewing work and ensuring compliance with standards and procedures; interacting with external service providers and reviewing designs for compliance with BC Hydro standards & practices

• Uses initiative and judgment to develop innovative engineering techniques and applies theoretical and practical knowledge in the analysis and resolution of problems. Discusses unusual problems with senior engineers or the supervisor.

• Maintain strong constructive relationships with internal and external clients and across the organization also including external service providers, contractors and suppliers as required.

• Works under general supervision, with work assigned in terms of specific objectives.

• Reviews overall plans and provides guidance for unusual features.

• Completed work is normally accepted as technically accurate and is reviewed for feasibility and soundness of judgment.

• Checks work and provides guidance to assigned staff.